Drives for vibrators
Drives for vibrators
In order to get the most out of our vibrating bases, we produce a series of electronic regulation and control panels. These allow to manage the intensity and frequency of the vibrations, to automatically switch on and off through level or overflow sensors, to maintain the stability of the vibrations through accelerometric sensors and, finally, to control the operation and stop of an external component.
Drives for vibrators
Built-in regulation boards
Timer
Description
The timing board (IP00) is controlled by a photocell and two external contacts, it is also ideal for mounting in electrical panels, control boxes or electrical cabinets, and directly on the wall or on DIN rails. Depending on the needs, the regulation board can be supplied both at 230V and 110V.
Electronic boards
[V]
MEX 3/6
Description
The regulation and control board (IP00) is designed for vibratory feeders, and offers the possibility to adjust the minimum vibration and to turn them on or off remotely. It is suitable for mounting in electrical panels, control boxes or electrical cabinets, and directly on the wall or on DIN rails. The regulation board is available at 230V or 110V, depending on the needs.
Electronic boards
[V]
[vbr/min]
6000
6000
CP 3/6
Description
The regulation and control board (IP00) is specifically designed for vibratory feeders, and offers the possibility to adjust both the minimum and maximum vibration, in addition to the remote start and stop. Also, it is possible to manage the vibration through a potentiometer, 0-10V or 4-20mA.
The regulation board is suitable for mounting in electrical panels, control boxes or electrical cabinets, either directly on the wall or on DIN rails. Also, it is available at 230V or 110V, depending on the specific needs.
Electronic boards
[V]
[vbr/min]
6000
6000
CPDRT 3/6
Description
The regulation and control board (IP00) is specifically designed for vibratory feeders and allows the adjustment of the minimum and maximum vibrations, as well as the remote start and stop. Also, it is possible to manage the timed on and off through a photocell and to use two external contacts for the operation of solenoid valves.
The regulation board is suitable for mounting in electrical panels, control boxes or electrical cabinets, either directly on the wall or on DIN rails. Finally, it is available at 230V or 110V, depending on the specific needs.
Electronic boards
[V]
[vbr/min]
6000
6000
INV04
Description
The frequency converter (IP00) has been specially designed to command vibration feeders. Specifically, these devices produce an output frequency independent of the frequency of the power supply network, which means that the converter can be powered by electrical networks that provide voltage at both 50Hz and 60Hz frequencies. This feature avoids balancing operations and balancing of springs.
This frequency converter is suitable for mounting in electrical panels, control boxes or electrical cabinets, either directly on the wall or on DIN rails. Also, it is available at 230V or 110V, depending on the specific needs.
Electronic boards
[V]
[vbr/min]
6000
Drives for vibrators
Electronic control and command panels
Series 11
Description
This is a regulation and control device for vibratory feeders (IP44) that includes a CP or MEX electronic board, depending on the specifics of the application, and is designed to be freely fixed to walls or frames. Specifically, the knob to adjust the amplitude of the vibration and the on/off button are located on the front cover of the box. In addition, this device can be supplied in 230V or 110V version, depending on specific needs.
Electronic panels
[V]
[vbr/min]
Series 14
Description
This is a regulation and control device (IP44) specifically designed for vibratory feeders, equipped with a CPDRT type electronic board, and can be easily fixed to walls or frames. Specifically, the knob for adjusting the amplitude of the vibrations and the on/off button are located on the front cover of the box. Moreover, this device can be supplied in 230V or 110V version, depending on specific needs.
Electronic panels
[V]
[vbr/min]
Series 14 inverter
Description
This is a frequency converter (IP44) specifically designed for controlling vibratory feeders. These devices generate an output frequency independent of the supply network frequency, which means that the device can be powered by electrical networks that provide voltage at a frequency of 50Hz or 60Hz. This eliminates the need for weight balancing and spring balancing operations.
The device is suitable for free fixing on walls or frames and has a knob, vibration parameter setting buttons, and an on/off button installed on the front cover of the box. Finally, this type of frequency converter can be provided at 230V.
Electronic panels
[V]
Series 19
Description
The proposed solution is a regulation and control unit for vibratory feeders (IP44) equipped with a CPDRT type electronic board and a CP or MEX board, depending on the specifics of the application.
The unit is suitable for free fixing on walls or frames and has a knob for adjusting the amplitude of the vibration and an on/off button installed on the front cover of the box. Additionally, the supply voltage can be customized according to the user's needs, choosing between 230V or 110V.
Electronic panels
[V]
[vbr/min]
MEX
3000
MEX
6000
MEX
3000
MEX
6000
MEX
3000
MEX
6000
MEX
3000
MEX
6000
CP
3000
CP
6000
CP
3000
CP
6000
CP
3000
CP
6000
CP
3000
CP
6000
Series 20
Description
This device consists of a regulation and control device for vibratory feeders with an IP44 protection rating, equipped with a CPDRT type electronic board, which can be combined with a CP board or a MEX board, depending on the needs of the application.
The device is designed to be freely fixed on walls or frames and has a knob for adjusting the amplitude of vibration and an on/off button, both installed on the front cover of the box. Moreover, it is possible to supply the device with an option at 230V or 110V, depending on the user's needs.
Electronic panels 230V
[V]
[vbr/min]
CP
MEX
3000
3000
CP
MEX
6000
6000
CP
MEX
3000
3000
CP
MEX
6000
3000
CP
CP
3000
3000
CP
CP
3000
6000
CP
CP
6000
3000
CP
CP
6000
6000
CP
MEX
3000
3000
CP
MEX
6000
6000
CP
MEX
3000
6000
CP
MEX
6000
3000
CP
CP
3000
3000
CP
CP
3000
6000
CP
CP
6000
3000
CP
CP
6000
6000
CPDRT
CPDRT
3000
3000
CPDRT
CPDRT
3000
6000
CPDRT
CPDRT
6000
6000
CPDRT
CPDRT
6000
3000
CPDRT
CPDRT
6000
6000
CPDRT
CPDRT
3000
6000
CPDRT
CPDRT
6000
3000
CPDRT
CPDRT
3000
3000
Electronic panels 110V
[V]
[vbr/min]
CP
MEX
3000
3000
CP
MEX
6000
6000
CP
MEX
3000
3000
CP
MEX
6000
3000
CP
CP
3000
3000
CP
CP
3000
6000
CP
CP
6000
3000
CP
CP
6000
6000
CP
MEX
3000
3000
CP
MEX
6000
6000
CP
MEX
3000
6000
CP
MEX
6000
3000
CP
CP
3000
3000
CP
CP
3000
6000
CP
CP
6000
3000
CP
CP
6000
6000
CPDRT
CPDRT
3000
3000
CPDRT
CPDRT
3000
6000
CPDRT
CPDRT
6000
6000
CPDRT
CPDRT
6000
3000
CPDRT
CPDRT
6000
6000
CPDRT
CPDRT
3000
6000
CPDRT
CPDRT
6000
3000
CPDRT
CPDRT
3000
3000
Drives for vibrators
Level Sensors
Robust and easily adjustable, they signal the level of moving material, allowing the servos to maintain optimal charge.
